Custom Safety Vest Artwork Brief: What Information to Send Your Supplier The morning crew at a Melbourne road‑work site gathered for their daily briefing, only to discover that the hi‑vis vests they’d just received were printed backwards. The logo was upside‑down, the reflective tape didn’t meet the required width, and the colour swatch was a […]
Workplace Inspection Readiness: Safety Vest Compliance Checklist for Employers A crew on a busy metro‑roadwork site was halted when an inspector spotted a traffic controller wearing a faded orange‑red vest with no reflective tape. The halt cost the contractor thousands in downtime and a formal notice from SafeWork NSW. That kind of slip‑up could have […]
How 3M Scotchlite Tape Compares to Standard AS/NZS 1906.4 Reflective Tape When a night‑shift crew on a regional mining site rolled out new hi‑vis vests, the foreman noticed the tape on half the garments was already dulled after just two weeks. The non‑compliant rolls had been bought cheap from an overseas supplier – they weren’t meeting AS/NZS 1906.4. Within […]
Workplace safety isn’t optional, yet too many businesses still treat high-visibility gear like an afterthought. In industries like construction, logistics, and warehousing, one missed visual cue can lead to serious accidents. That’s where JB’s hi-vis safety vest steps in as a simple but powerful solution. If you’re searching for reliable, compliant, and durable safety apparel, […]
How to Care for a Safety Vest to Extend Its Compliant Life in Australia When a crew on a busy construction site discovered a worker’s high‑visibility vest had started to peel at the seams, the foreman’s first call wasn’t for a new uniform – it was for the safety officer. The tape was flaking, the […]
How to Design a Custom Safety Vest Without a Graphic Designer in Australia The morning crew on a Melbourne construction site pulled on their new hi‑vis vests just before the lift‑off. Within minutes the foreman spotted a glaring problem – the company logo was printed upside‑down on the front, and the reflective tape didn’t wrap […]
Hi‑Vis Vest for City Parking Inspectors – What You Need to Know on Australian Streets A senior parking officer was pulling over a vehicle on a busy Melbourne CBD lane when a delivery truck, un‑aware of his presence, swerved sharply and clipped the officer’s leg. The inspector’s vest had faded fluorescent orange and the reflective […]
Top WHS Compliance Mistakes Australian Employers Make with Safety Vests When the foreman sent a crew out on a night‑shift road‑work project, he grabbed the bright orange‑red vests from the box without checking the class. Half the team was wearing Day‑only (Class D) gear, so when the flash‑lights swung on at 10 pm the site turned into […]
Safety Vest Washing Guide: How to Clean Hi‑Vis Without Damaging Compliance A crew on a busy Melbourne construction site spent a morning scrubbing their hi‑vis vests with hot water and a strong detergent. Within hours the reflective tape started to peel, the colour faded to a dull yellow, and the foreman got a call from […]
Custom Safety Vest Design Tool: How SafetyVest.com.au’s Online Designer Works When a traffic‑control crew arrived at a busy Pacific Highway site last winter, the supervisor reached for the hi‑vis vests – only to discover the fluorescent orange‑red shirts were faded, the reflective tape had peeled, and the company logo was stitched on the back where […]